pu foam insulation decorative exterior wall panels

High cost performance
 
1.  When purchasing insulation materials, not only to consider its thermal conductivity but also need to consider its weight. If the insulation layer is too heavy it will be hard to install then increasing the construction costs. Metallic embossed insulated panel its light weight only 3.7kg/m ² which can reducing the load of the wall to a great extent.

2. The surface of the panel is embossed metal which after baking finish and wont appear cracks, bulge. No radioactive contamination, health and environmental protection, It is an kind of environmentally friendly wall panel.

3.  Good quality, stable performance: The manufacturing process is controlled by the CNC automatic production line, so it has stable physical structure and chemical structure, product qualification rate can be reached 99%.
4.  Low maintenance cost and long service life: It can maintain decorative effect of the external walls for more than 45years. It is easy to clean and just need to use neutral detergent to wash.
 
 Significant energy-saving effect

1.   The surface material of the panel is aluminized zinc sheet which the thickness is 0.27-0.30mm.
Its weather resistance, acid resistance, alkali resistance, smoke resistance after special process treatment. The surface layer is greatly enhanced by the pressure balance principle and percent recovery is 99.9%. 
2.   Rigid polyurethane foam is the most environmentally friendly insulation materials in the world. Its insulation performance decreased only less than 3% after 25 years under high temperature testing. Compared with traditional materials, it has excellent heat insulation and cold resistance performance. The heating and cooling energy consumption is greatly reduced thus saving energy expenditure, cost-effective.
3.   Its unique design structure completing elimination of the "cold and heat bridge effect". Effectively avoiding indoor moisture, mildew and other phenomena. At the same time, as the panel is installed on the external wall of the building so avoiding the damages to the whole structure which caused by rain and snow weather and other natural factors. 

Perfect decorative effect

The surface can be made into a variety of different textures like brick, stone, mosaic, (wood) grain etc. A variety of colors and patterns can meet the requirements of different architectural style.

Simple  construction

1.  It is  dry prefabricated frame assembly method which can directly fix on the wall. The panel itself with a plug interface so just locking each panel together which greatly shorten the construction cycle.
2.  Neat construction process: no dust, no noise, clean, small footprint and no construction waste.