The production procedure of metal carving board

Metal carved panels are not affected by external factors, nor will they experience aging, falling, etc. like traditional wall skins, so they are very popular on the market, and metal carved panels have a beautiful appearance that can be enhanced The beauty of our building, but do you know how it is produced?

1. Fixed-thickness sanding is the process of sanding all silicon-calcium boards to the same thickness. In order to ensure that the quality of the product meets the standard requirements, there will be three sanding operations in the whole process. At first, I used the back sanding, then the front sanding, and when it was the third time, it was the front sanding of the plate.

2. Check the machine before applying the sealing primer to ensure that the height of the conveyor belt and the board are in an appropriate position. The purpose of this process is to form a waterproof layer, improve the waterproof performance, and prevent the phenomenon of hollowing on the surface.

3. The coating process of UV-putty and UV-primer is from a certain point of view mainly for checking deficiencies. There may be pits in the board after sanding. This step is to fill in these pits. As the process progresses, the process of this step will affect the spraying of the primer and topcoat.

4. Fluorocarbon primer coating is to improve the covering ability of the paint and reduce the amount of paint.

5. The function of spray paint is to form a decorative layer, so that the metal carved board product reflects an excellent decorative effect.

6. After the paint is sprayed and dried, it should be covered with a protective film. The purpose is to prevent the metal carved board product from being damaged during the construction process, and to prevent damage and pollution.

7. This process is a special place in the whole production process. This I art is a process independent of the calcium silicate board, and its purpose is to improve the permeability of the board and enhance the adhesion.

8. The purpose of compounding is relatively simple, in order to improve the insulation conditions.

9. The size required for the cutting length will become a qualified finished product in the later stage. Production sequence-items are also indispensable, and rough needs to be strictly implemented, otherwise the various effects of the metal carved board in use will be affected, and more and more damage will be caused.